| |
|
|
|
| |
|
Heatizon Systems is the industry leader in radiant floor heating for both
residential and commercial buildings. |
|
|
| |
Floor Warming |
|
|
"Only Heatizon Systems products have added computer technology to safely monitor your floor heating system day and night." |
|
Comfort
Heatizon's luxury radiant floor warming systems provide quiet, constant, and uniform heat under cold surfaces leaving them comfortable to the touch and adding unseen elegance to your project. |
Safety
Heatizon Systems products warm your home or building with low voltage radiant heat technology. In addition, only Heatizon Systems products have added computer technology to safely monitor your floor warming system day and night. |
Maintenance Free
The entire Heatizon System product line is solid state, has no moving parts to wear out, and has nothing that requires routine maintenance. |
|
|
| |
|
| Tired of getting stuck in your own driveway? Heatizon Systems low voltage snow melt technology is the solution. |
|
|
| |
Snow Melting |
|
|
"Heating your driveway with Heatizon Systems adds value to your home or building and increases the life of your driveway." |
Convenience
Retire your snow shovel and relax in the mornings. Our radiant snow melting technology is designed to conveniently and automatically eliminate snow and ice build up day and night, so you don't have to. |
|
Worry Free Reliability
An automatic snow sensor turns your system on and off which makes heating your driveway a no brainer. |
Economical
For snow melting in the U.S., an area of 285 square feet at the average power rate will cost less than 50 cents per continuous sixty minutes of operation time! |
Value
Heating your driveway with a Heatizon System adds value to your home or building, and increases the life of your driveway by preventing chemicals, shovels, and snow plows from damaging its surface. |
|
|
2 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Heatizon Systems produces the perfect long term solution to dangerous and destructive ice and snow build up on roofs. |
|
|
| |
|
|
Roof Deicing |
|
| |
Invisible Protection
Heatizon's patented roof heating products install directly under your roof covering materials protecting your investment from leaks and ice dams while remaining completely invisible. |
|
"Heatizon's patented roof heating products install directly under you roof covering materials protecting your investment from leaks and ice dams while remaining completely invisible." |
| |
Safety
Protect guests, clients, and loved ones and relax while your system safely prevents dangerous snow and ice build up on your roof. The Heatizon Control Unit incorporates a self-monitoring computer board with auto shut off mechanisms for out-of-ordinary operation. |
| |
Value
Heatizon Systems products add value to your home or building by eliminating potential roof leaks, torn gutters, and damaged shingles from snow and ice. |
| |
Heatizon Systems' low voltage radiant heat offers the comfort, safety, and reliability your deserve; it can be installed in an area as small as a single room to as large as an entire building. |
| |
|
|
Total Space Heating |
|
| |
|
Comfort
Unlike conventional heating systems, Heatizon's radiant heating products produce a clean, quiet, and uniform heat that transforms cold floors and furniture into heat emitting objects. |
Safety
Heatizon's patented low voltage technology is among the safest space heating products in the industry. Heatizon has built in computer technology that constantly monitors the operation of your system insuring the safety of you and your loved ones. |
Efficiency
Heatizon Systems products are incredibly energy efficient, utilizing 100% of the energy they draw to create heat. |
|
"Heatizon's radiant heating products produce a clean, quiet, and uniform heat that transforms cold floors and funiture into heat emitting objects ." |
| |
|
|
|
|
3 |
| |
|
|
|
|
|
| |
|
|
|
| |
Large Area Floor Warming Kits 110 to 670 sq. ft. |
|
| |
|
|
|
| |
Large Area Floor Warming Kits with Tuff Cable
Floor warming under tile, stone, marble, ans stampled or stained concrete are perfect applications for the Tuff Cable. These kits include the M321RS Programmable In-Floor Sensing Thermostat, Transformer, Control Unit, Tuff Cable, and a Rough-In Kit with 50' of Cold Lead. |
Tuff Cable Applications:
New Pour Concrete, Tile, Stone, Slate, Marble, Stamped Concrete, Gyp Crete, Heatizon Heatsink Kit and other cementitious applications. |
|
|
|
| |
|
|
|
|
| |
| Tuff Cable Kits (6" Spacing) |
|
|
Additional Components |
| Coverage sq. ft. |
Part Number w/CBX6 Control Unit |
Part Number w/CBX7 Control Unit |
Watts per sq. ft. |
Power Requirements |
P4184 |
Rough-in Box with Clips-Mounts to Concrete Wall |
| 110-150 |
TFW3-300 |
|
8-15 |
240 V 20 AMP |
|
| 151-180 |
TFW3-400 |
|
8-15 |
240 V 30 AMP |
ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| 181-200 |
TFW4-400 |
TFW4-400-7 |
8-15 |
240 V 30 AMP |
|
| 200-250 |
TFW5-500 |
TFW5-500-7 |
8-15 |
240 V 30 AMP |
ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| 251-279 |
TFW5-600 |
TFW5-600-7 |
8-15 |
240 V 30 AMP |
|
| 280-300 |
TFW6-600 |
TFW6-600-7 |
8-15 |
240 V 30 AMP |
CLDEXTKIT |
Cold Lead Extension Kit |
| 300-350 |
TFW6-700 |
TFW6-700-7 |
8-15 |
240 V 30 AMP |
PLASCLIPKIT |
Plastic Clip Kit to Attach Cable to Wood Subfloor or Subroof |
| 350-400 |
TFW6-800 |
TFW6-800-7 |
8-15 |
240 V 30 AMP |
|
| |
|
|
|
|
ANCHPLUGKIT |
Tuff Cable Anchoring Plug Kit to Attach Cable to Concrete |
| |
|
|
|
|
|
| |
|
|
|
|
CABREPKIT |
Tuff Cable Repair Kit |
| |
|
|
|
|
CABSPLKIT |
Tuff Cable Splice Kit |
| |
|
|
|
|
JUMPERKIT |
Jumper Kit for New Pour Concrete Floor |
| |
|
|
|
|
|
| |
|
|
|
|
TUFCABJMPKIT |
Tuff Cable Jumper Kit To Install Cable in 2 Non Continuous Areas |
|
|
| |
|
|
|
|
| |
Large Area Floor Warming Kits with ZMesh
ZMesh floor warming kits are perfect for taking the chill off of cold surfaces such as tile, hardwood, vinyl and any other non-conductive floor covering. All kits include M321RS Programmable In-Floor Sensing Thermostat, Transformer, Control Unit, ZMesh and a Rough-In Kit with 50' of Cold Lead. |
ZMesh Applications:
Hardwood, Carpet, Vinyl, Under Sublfloor Between Floor Joists, Laminate, Tile, Slate, Stone, and Marble. |
|
|
|
| |
|
|
|
|
| |
| |
|
|
|
Additional Components
|
| |
|
|
|
CLDEXTKIT |
Cold Lead Extension Splices |
| ZMesh Kits (2" Spacing) |
|
|
ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| Coverage sq. ft. |
Part Number |
Watts per sq. ft. |
Power Requirements |
|
|
| 114-175 |
TFW3-300 |
8-10 |
240 V 20 AMP |
ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| 114-200 |
TFW3-400 |
8-10 |
240 V 20 AMP |
|
| 207-290 |
TFW4-400 |
8-10 |
240 V 20 AMP |
CUTOUTKIT |
ZMesh Cut Out Kit |
| 290-320 |
TFW5-500 |
8-10 |
240 V 20 AMP |
JSTSCRKIT |
Kit For Installing One Zone of ZMesh Between Floor Joists |
| Dual Transformers (2 loops of mesh on tran) |
|
| 326-350 |
TFW5-600 |
8-10 |
240 V 30 AMP |
ZMESHJMPKIT |
ZMesh Jumper Kit To Install ZMesh in Non Continuous Areas |
| 351-420 |
TFW6-600 |
8-10 |
240 V 30 AMP |
|
| 450-580 |
TFW6-700 |
8-10 |
240 V 30 AMP |
E210 |
Cold Lead #2 - $/FT For Control Box Distance Extension |
| 581-670 |
TFW6-800 |
8-10 |
240 V 30 AMP |
E217 |
Transition Plate w/#2 Butt Splice |
| |
|
|
|
E218 |
Splice Plate - 12" Also Used For Repair |
| |
|
|
|
P1402 |
Splice Plate - 26" |
| |
|
|
|
P4184 |
Rough-in Box with Clips -- Mounts to Concrete Wall |
|
|
4 |
|
|
|
|
| |
|
|
|
| |
Medium Area Floor Warming Kits 15 to 110 sq. ft. |
|
| |
|
|
|
| |
Floorizwarm with Tuff Cable
Heatizon Systems presents its Floorizwarm AC models as a solution for floor warming and space heating needs in areas of 15 to 110 square feet. These systems will produce between 10 and 15 watts per square foot and utilize Tuff Cable technology which is installed in the thin set or mud bed below hard surfaces. These kits include and M337 programmable floor sensing thermostat, Transformer, Control Unit, Tuff Cable and 40 total feet of Cold Lead. Floorizwarm is listed by ETL to UL standards. |
Applications:
Tile, Stone, Concrete, Mortar, Thin set |
|
|
|
| |
|
|
|
| |
| Floorizwarm Low Voltage Kits |
|
Coverage sq. ft. |
Part Number |
Watts per sq. ft. |
Power Requirements |
 |
15-20 |
FLZ1520AC |
10-15 |
120 V. 20 Amp |
20-30 |
FLZ2030AC |
10-15 |
120 V. 20 Amp |
25-36 |
FLZ2536AC |
10-15 |
120 V. 20 Amp |
36-50 |
FLZ3650AC |
10-15 |
120 V. 20 Amp |
50-64 |
FLZ5064AC |
10-15 |
120 V. 20 Amp |
64-75 |
FLZ6475AC |
10-15 |
120 V. 20 Amp |
75-110 |
FLZ75110AC |
10-15 |
120 V. 20 Amp |
| |
|
|
|
| Accessories for Tuff Cable Small Area Floor Warming Kits |
| PLASCLIPKIT |
Plastic Clip Kit to Attach Cable to Wood Sublfoor or Subroof |
| ANCHPLUGKIT |
Tuff Cable Anchoring Plug Kit to Attach cable to Concrete |
| CABREPKIT |
Tuff Cable Repair Kit |
| CABSPLKIT |
Tuff Cable Splic Kit |
|
|
| |
|
|
|
|
|
| |
SLC500 with ZMesh
The SLC 500 ZMesh series by heatizon is designed for floor warming in areas under 104 square feet. These kits will produce 8 to 14 watts per square foot with a 2" spacing between runds of ZMesh. ZMesh is designed to go under all floor coverings including hardwood, carpet, tile and stone. These kits include an M321RS programmable in-floor sensing thermostat, Transformer, Control Box, ZMesh and 30' of Cold Lead. |
Applications:
Hardwood, Carpet, Vinyl, Tile, Slate, Stone, and Marble. |
|
|
|
| |
|
|
|
|
|
| |
| SLC500 Low Voltage Kits |
|
Coverage sq. ft. |
Part Number |
Watts per sq. ft. |
Power Requirements |
 |
20-27 |
ZFW025-50 |
8-10 |
120 V. 20 Amp |
28-48 |
ZFW050-50 |
8-10 |
120 V. 20 Amp |
52-63 |
ZRD1-100 |
8-14 |
120 V. 20 Amp |
62-87 |
ZFW1-75 |
8-10 |
120 V. 20 Amp |
88-116 |
ZFW1-100 |
8-10 |
120 V. 20 Amp |
| |
|
|
|
| Accessories for ZMesh Small Area Floor Warming Kits |
| JSTSCRKIT100 |
Joist Screen Kit - 100' |
| E217 |
Transition Plate w/#2 Butt Splice |
| E218 |
Splice Plate - 12" |
| CUTOUTKIT |
ZMesh Cut Out Kit |
| P1402 |
Splice Plate - 26" |
|
|
|
| |
|
|
|
|
5 |
| |
|
|
|
| |
|
|
|
| |
|
|
Snow Melting Kits |
|
| |
|
|
|
|
|
| |
Snow Melting Kits
For snow melting on driveways, walkways and stairs, Heatizon relies on the strength of its Tuff Cable. Tuff Cable can be installed in normal snow melt applications like new pour concrete, asphalt and pavers. In addition its low voltage technology allows it to be retrofitted into existing concrete and asphalt driveways, sidewalks, parking lots ect. These snow melting systems can produce up to 23 watts per square foot if the cable is spaced on 6 inch centers or up to 34.5 watts per square foot on 4 inch centers. The kits below demonstrate the total square footage at both 4 and 6 inch spacing. All kits with 3 zones or more are required to have an M329 selector box which is included where needed. Each kit includes an M325D 12 hour timer, Control Unit, Transformer, Tuff Cable, and a Rough-In Kit with 50' of Cold Lead. |
Applications:
Driveways, walkways, stairs, access ramps, commercial ramps, loading docks and building entrances. |
|
|
|
| |
|
|
|
|
|
| |
| Snow Melting Kits |
|
|
|
| Sq. Ft. Coverage for up to 23 Watts |
Sq. Ft. Coverage for up to 34.5 Watts |
|
|
|
Standard 6 " Spacing |
High Performance 4" Spacing |
Part Number w/CBX6 Control Unit |
Part Number w/CBX7 Control Unit |
Power Requirements |
| |
|
|
|
|
| 28-47 |
14-27 |
TSM1-100 |
|
120 V 20 AMP |
| 48-89 |
28-54 |
TSM2-200 |
|
240 V 20 AMP |
| 89-130 |
55-87 |
TSM3-300 |
|
240 V 20 AMP |
| 131-171 |
88-114 |
TSM4-400 |
TSM4-400-7 |
240 V 30 AMP |
| 172-236 |
115-143 |
TSM5-500 |
TSM5-500-7 |
240 V 30 AMP |
| 236-280 |
144-200 |
TSM6-600 |
TSM6-600-7 |
240 V 30 AMP |
| 472-560 |
288-400 |
2TSM6-600 |
2TSM6-600-7 |
(2)240 V 30 AMP |
| 708-840 |
432-600 |
3TSM6-600-S |
3TSM6-600-7S |
(3)240 V 30 AMP |
| 944-1120 |
576-800 |
4TSM6-600-S |
4TSM6-600-7S |
(4)240 V 30 AMP |
| 1180-1400 |
720-1000 |
5TSM6-600-S |
5TSM6-600-7S |
(5)240 V 30 AMP |
| 1416-1680 |
864-1200 |
6TSM6-600-S |
6TSM6-600-7S |
(6)240 V 30 AMP |
| 1652-1960 |
1008-1400 |
7TSM6-600-S |
7TSM6-600-7S |
(7)240 V 30 AMP |
| 1888-2240 |
1152-1600 |
8TSM6-600-S |
8TSM6-600-7S |
(8)240 V 30 AMP |
| 2124-2520 |
1296-1800 |
9TSM6-600-S |
9TSM6-600-7S |
(9)240 V 30 AMP |
| 2360-2800 |
1440-2000 |
10TSM6-600-S |
10TSM6-600-7S |
(10)240 V 30 AMP |
| 2596-3080 |
1584-2200 |
11TSM6-600-S |
11TSM6-600-7S |
(11)240 V 30 AMP |
| 2832-3360 |
1728-2400 |
12TSM6-600-S |
12TSM6-600-7S |
(12)240 V 30 AMP |
|
|
| |
| Accessories for Snow Melting Kits |
| Activation Devices |
| M325D |
Timer - 12 hour Deco w/LED/Bezel |
| M326 |
Snow Switch - Aerial 1hr |
| M326-5 |
Snow Switch - Aerial 5hr |
| M326A |
Snow Switch - Remote Aerial Sensor 120V |
| M326ARS |
Snow Switch - 120V Aerial and Gutter |
| M329 |
Selector Box, Req 120V or 240V (Req 3+ Zones) |
| M336 |
Controller - Electric Temp. w/LED 120V |
|
| Additional Components |
| P4184 |
Rough-in Box with Clips-Mounts to Concrete Wall |
| ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| CLDEXTKIT |
Cold Lead Extension Splices |
| E210 |
Cold Lead #2 |
| CABREPKIT |
Tuff Cable Repair Kit |
| CABSPLKIT |
Tuff Cable Splice Kit |
| JUMPERKIT |
Jumper Kit For All Concrete Joints |
| NI117 |
Insulation-Concrete Barrier Foil - 500sqft |
| NI118 |
Insulation-Rigid - 4' x 8' x 1" sheet |
| NI119 |
Insulation-Slab Shield-252 sqft |
| NI146 |
Plastic Chairs-Bag For 1 Full Zone |
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
7 |
| |
|
|
|
| |
Space Heating Kits 110 to 670 sq. ft. |
|
| |
|
|
|
| |
Space Heating Kits with Tuff Cable
Heatizon's radiant in-floor heating products provide comfort to individual rooms or entire homes or buildings. These systems can be custom designed by a Certified Heatizon Distributor to meet the requirements of almost any heat loss calcualtion. All Kits include M321 Programmabel Thermostat, Transformer, Control Unit, Tuff Cable and a Rough-in Kit with 50' of Cold Lead. |
Applications:
New Pour Slab, Tile, Stone, Slate, Marble, Stamped Concrete, Gyp Crete, and other cementicious applications. |
|
|
|
| |
|
|
|
|
| |
| Tuff Cable Kits (6"Spacing) |
| Coverage sq. ft. |
Part Number w/CBX6 Control Unit |
Part Number w/CBX7 Control Unit |
Watts per sq.ft. |
Power Requirements |
| 110-150 |
TSH3-300 |
|
8-15 |
240 V 20 AMP |
| 151-180 |
TSH3-400 |
|
8-15 |
240 V 30 AMP |
| 181-200 |
TSH4-400 |
TSH4-400-7 |
8-15 |
240 V 30 AMP |
| 200-250 |
TSH5-500 |
TSH5-500-7 |
8-15 |
240 V 30 AMP |
| 251-279 |
TSH5-600 |
TSH5-600-7 |
8-15 |
240 V 30 AMP |
| 280-300 |
TSH6-600 |
TSH6-600-7 |
8-15 |
240 V 30 AMP |
| 300-350 |
TSH6-700 |
TSH6-700-7 |
8-15 |
240 V 30 AMP |
| 350-400 |
TSH6-800 |
TSH6-800-7 |
8-15 |
240 V 30 AMP |
| Accessories for Tuff Cable Space Heating |
| Acrivation Devices |
|
|
|
| M320 |
Remote Bulb Sensor |
*Consult Heatizon Systems before installing more than 15 watts per sq. ft. |
| M321RS |
T-Stat-Programmable w/Sensor, Requires 2 AA Batteries |
|
| |
| Additional Components |
| P4184 |
Rough-in Box with Clips-Mounts to Concrete Wall |
| ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| E210 |
Cold Lead #2 - $/Ft for Control Box Distance Extension |
| CLDEXTKIT |
Cold Lead Extension Kit |
| PLASCLIPKIT |
Plastic Clip Kit to Attach Cable to Wood Subfloor or Subroof |
| ANCHPLUGKIT |
HW36-270 |
| CABREPKIT |
Tuff Cable Repair Kit |
| CABSPLKIT |
Tuff Cable Splice Kit |
| JUMPERKIT |
Jumper Kit For All Concrete Joints |
| TUFCABJMPKIT |
HW36-480 |
|
|
|
| |
|
|
|
|
| |
Space Heating Kits with ZMesh
From basements and sunrooms to cabins and beach homes, ZMesh is perfect for total space radiant heating. ZMesh is the only product on the market that can be installed under various floor coverings without any floor buildup. All kits include M321 Programmable Thermostat, Transformer, Control Unit, ZMesh and a Rough-in Kit with 50' of Cold Lead. |
Applications:
Hardwood, Carpet, Vinyl, Under Subfloor Between Floor Joists, Laminate, Tile, Slate, Stone, Marble, or Combination. |
|
|
|
| |
|
|
|
|
| |
| ZMesh Kits (2" Spacing) |
|
Accessories for ZMesh Space Heating
(Activation Devices same as Tuff cable Space heating Above) |
| Coverage sq. ft. |
Part Number |
Watts per sq. ft. |
Power Requirements |
Additional Components |
| 20-27 |
ZSH025-50 |
8-10 |
120 V 20 AMP |
CLDEXTKIT |
Cold Lead Extension Splices |
| 28-46 |
ZSF050-50 |
8-10 |
120 V 20 AMP |
E210 |
Cold Lead #2 - $/Ft For Control Unit Distance Extension |
| 65-87 |
ZSH1-75 |
8-10 |
120 V 20 AMP |
|
| 88-104 |
ZSH1-100 |
8-10 |
120 V 20 AMP |
ZMESHJMPKIT |
ZMesh Jumper Kit To Install ZMesh in Non Continuos Areas |
| 114-175 |
ZSH2-150 |
8-10 |
240 V 20 AMP |
|
| 114-200 |
ZSH2-200 |
8-10 |
240 V 20 AMP |
P1402 |
Splice Plate - 26" |
| 207-290 |
ZSH3-250 |
8-10 |
240 V 20 AMP |
CUTOUTKIT |
ZMesh Cut Out Kit |
| 290-320 |
ZSH3-300 |
8-10 |
240 V 20 AMP |
P4184 |
Rough-in Box with Clips-Mounts to concrete Wall |
| Dual Transformer (2 Loops of ZMesh per zone) |
|
|
| 326-350 |
ZSH22-150-2 |
8-10 |
240 V 30 AMP |
ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| 351-420 |
ZSH22-200-2 |
8-10 |
240 V 30 AMP |
|
| 450-580 |
ZSH23-250-2 |
8-10 |
240 V 30 AMP |
ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| 581-670 |
ZSH23-300-2 |
8-10 |
240 V 30 AMP |
|
| |
|
|
|
JSTSCRKIT |
Kit for Installing 1 Zone of ZMesh Betweed Floor Joists |
|
|
| |
|
|
|
|
8 |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
Roof Deicing |
|
| |
|
|
|
|
|
| |
Roof Deicing Systems with ZMesh
ZMesh may be installed under and non conductive shingle and can be screwed, stapled or nailed through provided the nails, staples or screws do not come in contact with anything electrically conductive. Proper installation requires that ZMesh be completely covered with ice and water shield or other acceptable waterproof material. Kits include a 12 Hour Timer, M326ARS Temperature Moisture sensor, Transformer, Control Unit, 9" ZMesh, and Rough-in Kit with 50' of Cold Lead. |
Applications:
Asphalt Shingles, Wood Shake Shingles, Slate Shingles, Composite Shingles, Membrane Roofing. |
|
|
|
| |
|
|
|
|
|
| |
| Roof Deicing with ZMesh |
|
Coverage sq. ft. |
Part Number |
Watts per sq. ft. |
Power Requirements |
 |
24-33 |
ZRD050-50 |
10-13 |
120 V. 20 Amp |
34-46 |
ZRD1-50 |
10-13 |
120 V. 20 Amp |
47-77 |
ZRD1-100 |
10-13 |
120 V. 20 Amp |
78-92 |
ZRD2-100 |
10-13 |
240 V. 20 Amp |
93-140 |
ZRD2-150 |
10-13 |
240 V. 20 Amp |
141-183 |
ZRD3-200 |
10-13 |
240 V. 20 Amp |
183-230 |
ZRD3-250 |
10-13 |
240 V. 20 Amp |
DUAL SYSTEMS 100' of Cold Lead |
|
231-276 |
ZRD22-150-2 |
10-13 |
240 V. 30 Amp |
277-316 |
ZRD22-200-2 |
10-13 |
240 V. 30 Amp |
317-367 |
ZRD23-200-2 |
10-13 |
240 V. 30 Amp |
368-450 |
ZRD23-250-2 |
10-13 |
240 V. 30 Amp |
|
|
| |
|
|
|
|
|
| |
| Accessories for ZMesh Roof Deicing |
 |
| Activation Devices |
| M326 |
Snow Switch - Aerial 1Hr |
| M326-5 |
Snow Switch - Aerial 5Hr |
| M326A |
Snow Switch - Remote Sensor |
| M326ARS |
Snow Switch - 120 V Aerial |
| M329 |
Selector Box, Requires 120 V or 240 V |
| M332 |
Gutter Controller |
| M335 |
Snow Switch - Gutter |
| M335US |
Weather Watcher Sensor |
| M336 |
Controller - Electric Temp. w/LED |
| Additional Components |
| E217 |
Transition Plate w/#2 Butt Splice |
| E218 |
Splice Plate - 12" |
| P1402 |
Splice Plate - 26" |
| P4184 |
Rough-in Box with Clips - Mounts to Concrete Wall |
| CUTOUTKIT |
ZMesh Cut Out Kit |
| ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| CLDEXTKIT |
Cold Lead Extension Kit |
| NI126 |
Roof Alarm |
| ZMESHJMPKIT |
ZMesh Jumper Kit To Install ZMesh In Non Continuous Areas |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
9 |
| |
|
|
|
| |
|
|
|
|
| |
Roof Deicing |
|
|
| |
|
|
|
|
| |
Patented Heat Sink Kits with Tuff Cable
The Tuff cable Heat Sink kits for roof deicing are designed to be installed under metal roofing, valley metal, and flashing. These systems can produce up to 23 watts per square foot on 6 inch spacing, and are invisible to the eye, leaving a clean architectural appearance. The kits below include a 12 Hour Timer, Gutter or Air Sensing Temperature and Moisture sensor, Transformer, Control Unit, Tuff Cable, Heat Sink and a Rough-in Kit with 50' of Cold Lead. Please call your Heatizon Distributor for customized Heatizon Heatsink design. |
Applications:
Metal Roofs, Valley Metal, or Metal Flashing, etc. |
|
|
|
| |
|
|
|
|
| |
 |
Roof Deicing Kits with Tuff Cable |
| Coverage sq. ft. |
Part Number w/CBX6 Control Unit |
Watts per sq. ft. |
Power Requirements |
| 6-10 |
CRD025-100 |
12-23 |
120 V 20 AMP |
| 11-30 |
CRD050-100 |
12-23 |
120 V 20 AMP |
| 30-35 |
CRD1-200 |
12-23 |
120 V 20 AMP |
| 55-105 |
CRD2-300 |
12-23 |
120 V 20 AMP |
| 95-175 |
CRD3-400 |
12-23 |
240 V 20 AMP |
| 132-200 |
CRD22-200-2 |
12-23 |
240 V 30 AMP |
| 200-225 |
CRD22-300-2 |
12-23 |
240 V 30 AMP |
| 206-300 |
CRD23-300-2 |
12-23 |
240 V 30 AMP |
| 301-370 |
CRD23-400-2 |
12-23 |
240 V 30 AMP |
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| |
 |
Accessories for Heat Sink Roof Deicing |
| Activation Devices |
| M326 |
Snow Switch - Aerial 1Hr |
| M326-5 |
Snow Switch - Aerial 5Hr |
| M326A |
Snow Switch - Remote Sensor |
| M326ARS |
Snow Switch - 120 V Aerial |
| M329 |
Selector Box, Requires 120 V or 240 V |
| M332 |
Gutter Controller |
| M335 |
Snow Switch - Gutter |
| M335US |
Weather Watcher Sensor |
| M336 |
Controller - Electric Temp. w/LED |
| Additional Components |
| P4184 |
Rough-in Box with Clips - Mounts to Concrete Wall |
| ENCLKIT1 |
Enclosure Kit - 16"h x 20"w x 10"d For One Control Unit |
| ENCLKIT2 |
Enclosure Kit - 24"h x 24"w x 12"d For Two Control Units |
| CLDEXTKIT |
Cold Lead Extension Kit |
| CABREPKIT |
Tuff Cable Repair Kit |
| CABSPLKIT |
Tuff Cable Splice Kit |
| TUFCABJMPKIT |
Tuff Cable Jumper Kit To Install Cable In 2 Non Continuous Areas |
| CABCENPROKIT |
Tuff Cable Heatsink Center Protector Kit |
| CABO/EPROKIT |
Tuff Cable Heatsink Origination/End Protector Kit |
| |
|
|
|
| |
|
|
|
|
10 |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
Radiant Trak Snow Melting Mats |
|
| |
|
|
|
|
|
| |
| Heatizon Radiant Trak |
Heatizon Radiant Trak portable snow and ice melting products can provide a convenient and effective solution to snow and ice accumulation for walkways, driveways, stairs, loading docks, handicap ramps and many other surfaces. Mats have a 15 ft. power lead, and either plug directly into a standard 120V or 240V outlet, or can ben hardwired into an electrical junction box. UL Listed; 2 year warranty. |
 |
Traction Mat: Radiant Trak Traction Mat is designed to act as an entrance mat. Radiant Trak Traction Mat is buit with non-slip, UV protected rubber, and is designed to be left out for the entire winter season. |
|
 |
Rubber Stair Treads: Radiant Trak Rubber Stair Treads are built with non-slip, UV protected rubber, and is designed to endure harsh wear. Radiant Trak Rubber Stair Treads are designed to be left out for the entire winter season. |
 |
Aluminum Stair Treads: Radiant Trak Aluminum Stair Treads are designed to endure extra heavy foot traffic. Radiant Trak Aluminum Stair Treads are made of extruded aluminum with abrasive filler to provide extra traction, and are designed to be left our for the entire year. |
|
| Radiant Trak Snow Melting Mats |
| Product Number |
Size |
| RTM24-3 (120V) |
24" x 3' |
| RTM24-6 (120V) |
24" x 6' |
| RTM24-9 (120V) |
24" x 9' |
| RTM24-12 (120V) |
24" x 12' |
| RTM24-15 (120V) |
24" x 15' |
| RTM24-18 (120V) |
24" x 18' |
| RTM24-20 (120V) |
24" x 20' |
| RTM36-4* |
36" x 4' |
| RTM36-6* |
36" x 6' |
| RTM36-9* |
36" x 9' |
| RTM36-12* |
36" x 12' |
| RTM36-15B (240V) |
36" x 15' |
| RTM36-18B (240V) |
36" x 18' |
| RTM36-21B (240V) |
36" x 21' |
| RTM36-25B (240V) |
36" x 25' |
| *Products available in both 120V and 240V (Add B to Part number for 240V) |
|
| Radiant Trak Stair Treads |
| Radiant Trak Rubber Stair Treads Product Number |
Radiant Trak Aluminum Stair Treads Product Number |
Size |
Allowed Max Qty. to Connect |
| RTRST9-2* |
RTAST9-2* |
9" x 2' |
10 |
| RTRST9-3* |
RTAST9-3* |
9" x 3' |
10 |
| RTRST9-4* |
RTAST9-4* |
9" x 4' |
10 |
| RTRST9-5* |
RTAST9-5* |
9" x 5' |
8 |
| RTRST11-2* |
RTAST11-2* |
11" x 2' |
10 |
| RTRST11-3* |
RTAST11-3* |
11" x 3' |
10 |
| RTRST11-4* |
RTAST11-4* |
11" x 4' |
8 |
| RTRST11-5* |
RTAST11-5* |
11" x 5' |
8 |
| *Also available in 240V (Add B to part number for 240V) |
| Radiant Trak Accessories |
| M307 |
Thermostatically Controlled Outlet Device |
| M319 |
Aerial Snow Switch, 240V |
| M319-120 |
Aerial Snow Switch, 120V |
|
|
|
| |
|
|
|
|
|
| |
Eave, Gutter and Downspout Products |
|
| |
|
|
|
|
|
| |
| Heatizon Systems' GutterMelt |
| Heatizon Systems' GutterMelt raingutter, downspout, and eave deicing system provides heat to prevent ice dam formation and to maintain flow paths on eaves, and in gutter and downspouts. This self regualting heating cable is placed directly on top of the shingles or roofing material and/or in the rain gutter and downspout system. Kits include 100 feet of self regulating heating cable, 1 Power Connect Kit, One End Seal Kit, and one Splice Tee Kit. UL Listed; 1 year Warranty. |
| |
|
|
|
|
| |
|
| Accessories |
| HT386476 |
Cable, Additional Per Foot, 120V |
| HT386492 |
Cable, Additional Per Foor, 240V |
| HT386505 |
Power Connect Kit - RG-PK-PAK |
| HT386548 |
Application Tape & Labels - RG-ATK-PAK |
| HT393473 |
Plug In Cord Set w/GFI - TW-GFI-CS |
| HT386513 |
Splice & Tee Kit - RG-SK-PAK |
| HT386521 |
End Seal Kit - RG-EK-PAK (3 ct) |
| HT386411 |
Downspout Hanger Kit - RDK-PAK |
| HT393481 |
Junction Box w/ELCI - TW-JB-GFI - 120V |
| Self-Regulating Gutter |
HT393490 |
Plug In GFI Adaptor - TW-PA-GFI |
| Heating Cable Kits |
HT386540 |
Roof Clips (10 ct) |
| HT386468 EZP |
120VAC |
| HT386484 EZP |
240VAC |
|
HT40999 |
HMZ Application Tape, 150ft Roll |
| |
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
11 |