ZMesh is a cut-to-length product, unlike most UL-listed radiant heating cables which are fixed-length. This gives installers flexibility to size each run precisely to the space — eliminating the waste and design constraints of fixed-length systems. ZMesh is available in rolls from 50 to 400 feet and can be cut on site to the exact length required by the project layout.
Yes. ZMesh is one of the only radiant heating elements on the market that can be repaired in the field if cut or damaged. Repair requires a customized copper splice plate and solder — a straightforward process compared to the full element replacement required by most competing fixed-length heating cables. This repairability is a meaningful long-term advantage, particularly for installations that may be subject to renovation or remodeling work years after the original installation.
Yes — provided the nail, screw, or staple does not make contact with any other electrically conductive material. ZMesh can be nailed and stapled through freely during roofing and flooring installation, which is one of its key practical advantages over conventional heating cables. This eliminates the need to plan fastener locations around the heating element and allows standard roofing and flooring installation techniques to proceed unmodified.
Yes. ZMesh can be retrofitted between floor joists from an unfinished basement or crawlspace below, without disturbing the finished floor above. This makes it one of the only radiant heating elements that can be added to an existing home without any flooring removal — a significant advantage for renovation projects where disruption and cost need to be minimized.
Yes. ZMesh is well suited to hardwood floor heating. The 12-inch width is the standard recommendation for hardwood applications. Before installation, allow the hardwood to acclimate to the room’s humidity level for several weeks to minimize dimensional changes after heating begins. After laying and connecting ZMesh, test and then run the system for before nailing or stapling the hardwood to the subfloor — this allows the wood to adjust to its heated operating temperature. As with all radiant floor heating under hardwood, confirm with the flooring manufacturer that surface temperatures will not exceed 85°F.
No. Unlike most radiant heating cables that must be embedded in a mortar or self-leveling compound to transfer heat, ZMesh is installed directly beneath the floor covering without any mortar bed or heatsink embedment. Because ZMesh is only 1/16 inch thick, it adds virtually no height to the floor assembly — eliminating the cost of a cementitious mud bed, the structural upgrades needed to support its weight, and the installation complexity it introduces. This makes ZMesh one of the most practical radiant floor heating solutions for both new construction and retrofit projects.
ZMesh carries an industry-leading 25-year manufacturer’s warranty. The long warranty is backed by the product’s construction: because ZMesh is installed under roofing or flooring rather than exposed to the elements, it is protected from UV damage, physical impact, and weathering. Heatizon’s distributors have documented ZMesh installations from decades ago that remain fully operational and visually unchanged. In most installations, ZMesh will outlast the roofing or flooring material installed above it.
The width choice affects heat output, not coverage area. The 9-inch mesh allows more runs to be placed in a given space, resulting in higher watts per square foot — up to 13 watts per square foot — making it the recommended choice for roof deicing where aggressive snow and ice melting is needed. The 12-inch mesh produces a lower watt density, which is better suited for radiant floor heating where even, gentle warmth is the goal. Heatizon’s design team specifies the appropriate width for each project based on application and local climate.
ZMesh serves two distinct applications: under-shingle roof deicing and ice dam prevention, and radiant floor and space heating. For roof applications, ZMesh is installed beneath non-conductive shingles, membranes, and wood decking to melt snow and ice from eaves and valleys. For floor applications, ZMesh is installed beneath virtually any non-conductive floor covering — including hardwood, tile, stone, carpet, engineered wood, linoleum, and vinyl — to provide even, comfortable radiant warmth. Both applications use the same physical element; the installation method and wattage configuration differ by use case.
ZMesh is a woven bright bronze metal mesh heating element manufactured by Heatizon Systems. It resembles screen door material in appearance and is approximately 1/16 inch thick, available in 9-inch and 12-inch widths and in lengths from 50 to 400 feet. The bronze construction is highly durable, fully recyclable, and designed to outlast the roofing or flooring installed above it. ZMesh has been in continuous production and use since 1979.