Category : Radiant Floor Heating – Archive

ZMesh: 9″ or 12″?

Our ZMesh product is a unique bronze mesh which can be used for floor warming, space heating, and roof deicing. Its unique construction allows it to be installed beneath non-conductive roof coverings like asphalt shingles, providing deicing without compromising the look of your roof. ZMesh is also perfect for floor installation beneath hardwood, carpet, and other flooring materials as it can be nailed or stapled through.

Read More

Tips for Installing Fixed Length Systems

When installing radiant heat for snow melting or floor warming, one factor that significantly impacts the process is whether the cable is fixed length or cut to fit in the field. Many of our products consist of a heating element and a cold lead. This cold lead does not heat up, and is used to connect the heating element to power. In our fixed length cables these cold leads come pre-attached from the factory and the heating element cannot be cut or adjusted; the cold leads can be cut to fit the circumstances.

Read More

ZMesh: A Brief History

Heatizon ZMesh has a long and successful history of floor warming, space heating, and roof deicing. Its unique construction allows the bronze mesh to be nailed or stapled through during installation, making it ideal for heating under carpet, wood floors, or non-conductive shingles. The system is listed to ETL standards for interior floor and space heat, as well as roof deicing beneath non-conductive materials.

Read More

Heating Linoleum Floors

Linoleum has long been a popular flooring choice for its cost and durability. Linoleum and variants like Marmoleum have seen a resurgence lately due to their natural composition and environmentally friendly qualities.

Radiant heat pairs with linoleum products for added comfort. Heatizon offers a number of products suitable for heating linoleum, but our ZMesh does it best.


A bronze mesh that is rolled out beneath a variety of floor coverings, low voltage ZMesh provides a comfortable, even heat. This unique product from Heatizon is a great solution for heating under linoleum and similar floors, as well as wood, carpet and floating floor systems.

Glue Down Sheets or Tiles

Linoleum is commonly installed as sheets that are glued down. For heating these sheets, ZMesh is laid out and either stapled to the wood subfloor or glued down to a concrete subfloor with a tile mastic. Care is taken to keep the mesh flat for minimum floor buildup.

A thin sheet of plywood or lauan is placed over the mesh, and the linoleum is glued down. This same process works for glue down linoleum tiles.

Floating or Click Systems

Linoleum is also becoming more common in click install or floating systems. ZMesh is perfect for floating floors as it is installed over the subfloor and covered with an underlayment. The floating floor system can then be installed directly over the mesh and underlayment.

Radiant Heat and Wood Floors

Previously, we discussed the question of “what type of flooring can be installed over radiant heat?”

This question often involves some variety of wood flooring. While it is true that wood flooring may not tolerate temperature fluctuations the same way marble or slate does, it does not mean you cannot heat wood floors. Radiant heat or not, wood flooring is meant to be acclimated before installation. When this is done, and all manufacturer instructions and guidelines are followed, wood floors can certainly be heated.

Electric radiant heat is ideal for wood floors because it offers a greater level of control than hydronic systems. Thermostats and sensors send electrical signals to your control units, resulting in immediate action by the heating element.

Heatizon’s ZMesh product is perfect for heating wood floors. It easily rolls out and can be nailed or stapled through when the floor is laid over the top. ZMesh provides a precise and even heat that takes the luxury of wood floors to a new level.

For more information on heating wood and other floor coverings, check out the information provided here.

What Type of Flooring Can Be Installed Over Radiant Heat?

A common question we see goes something like this:

“What kind of flooring can I install over my radiant heat?”

We recognize that on occasions, a project will involve installing new flooring materials over existing radiant heat. However, in situations where radiant heat is being added, we like to adjust the question so it looks more like this:

“What type of flooring do you want to heat?”

You see, Heatizon Systems offers a heating solution for most any floor covering you can come up with, so why limit yourself by asking the wrong question?

Tile, stone, carpet, hardwood, linoleum, laminate, concrete, we can heat it all and more. Our range of systems gives you the freedom and versatility needed to plan your project the way you want, without restricting your options and choices. Additionally our activation devices allow different heating elements to be controlled off of one device, letting you heat different floor coverings as part of one system.

With this in mind, it is important to always follow the manufacturer instructions for both your floor and your radiant heating system.

Now Is the Perfect Time to Install Radiant Heating

Summer brings with it a multitude of outside chores of home remodeling projects, whether it be landscaping your yard, pouring a new cement patio, re-shingling the roof or repainting the home. What many Utah homeowners don’t realize is that summer is the perfect time to install a snow-melt radiant heating system.

According to Steve Love, sales manager for Heatizon, snow-melt and interior floor heating systems have been around for about 25 years and are becoming more and more popular in and outside of Utah. Heatizon manufactures a complete line of low-voltage radiant heating products.

“Imagine snow and ice automatically melting from your driveway and sidewalks. Or your tile and hardwood floors being comfortably warm to your bare feet,” Love explains. Unlike forced air systems, radiant heat, which is installed underneath flooring, warms objects, not just the air. It’s a much more comfortable and even heat.

Heatizon’s radiant heat systems use one of two products that can be installed in new construction or retrofitted to existing applications. The Tuff Cable, a copper element, is used in snowmelting systems for driveways or sidewalks. In an existing system, technicians cut thin, inch-deep channels that are 6 inches apart into the pavement, which is where the cable is laid and then closed with a sealant. For new driveways or walkways, the cable is installed just before the concrete in poured.

One of the most recognized local projects that Heatizon undertook using The Tuff Cable was Utah’s TRAX light rail system. The snow melting system was installed on all the passenger station access ramps to keep the area from snow during the winter. One of its largest projects- 20,000 square feet- was the LDS Conference Center, where the cable was installed on plaza sidewalks and stairs.

For interior flooring applications, as well as under-shingle roof systems, Heatizon uses Z Mesh, a bronze wire mesh, which is placed over an existing concrete floor or on top of the wood subfloor. Tile, carpet or wood flooring can then be placed over the heating system.  In roofing systems, the mesh is installed underneath the shingles, making it virtually invisible.

An in-floor radiant system is ideal for homeowners who are finishing off their basement, yet not sure how to make walking across cold floors more bearable during the winter.

For Richard Hull, who is building an addition on to his father’s 1950 home in Hooper, installing a Heatizon system was a no-brainer. In order to install a conventional forced-air system, he would have had to run new ductwork throughout the new part of the house, which he says would have cost the same as installing a radiant system. Hull also had managed the 7,000-square foot Hidden Springs Resort Ranch in Nephi, which had been heated by a Heatizon system. It was only after living there that he was convinced that radiant heat was the only way to go.

“It’s a more efficient, uniform heat that is distributed more evenly because the heat rises from the floor,” he says. “Also, I anticipate my heating costs will be about the same as if I had a forced-air system.”

“What makes the technology so unique is that Heatizon uses a low-voltage system, ranging from 8 to 30 volts AC,” Love notes, “eliminating safety concerns for water, cuts and nails or screw driven through the element.”

Besides safety, radiant heat offers a number of other benefits over the traditional heating systems- one being that radiant heat is 51 percent more efficient than forced-air systems, making it less expensive to run.

“With a radiant heat system, you can reduce your heating bill between 23 to 26 percent, whether it be natural gas or electricity,” Love says.

A Heatizon System does not need to cycle constantly, like other systems, making it more cost-effective. Therefore, homeowners can program the system to go on and off at specific times based on their needs. For example, to run a zone of a snowmelting system during a snowstorm would cost about $1.53 for four hours (based on Salt Lake City electricity rates).

From a health standpoint, radiant heat is also cleaner and environmentally friendly. With a forced-air system, pollen, dust, and other particles are circulating throughout the air, making it uncomfortable for those who suffer from allergies or asthma.

With other heating system, homeowners are limited on where they can place furniture, wall coverings and decorations because of register and radiator placement.

Because all Heatizon systems are solid-state and are not comprised of moving parts, homeowners do not need to worry about maintenance. There is also no risk of broken pipes or tubes or expensive repairs resulting from water damage.

Because it offers such high-quality and durable products in its heating systems, Heatizon provides its customers with a 25-year warranty.

For more information on Heatizon Systems products, call 801-293-1232 or visit the Web site at

Radiant Floor Warming Design

Radiant floor warming is a wonderful addition to any living or working space. The warm floor makes the space the most comfortable in the entire building.  Designed to provide years of trouble free service, high quality floor warming systems are designed to last substantially longer than the flooring covering itself.  Given their long life expectancy and the repair/replacement expense incurred if the heating element or tubing gets damaged or, improperly installed, a significant amount of time should be devoted to the design, product selection and installation of radiant floor warming system.


Designing a radiant floor warming system is relatively easy, provided; a few simple rules are followed.  Listed below please find a list of simple rules for designing a radiant floor warming system:

  1. The design should deliver 7.5 to 12 watts (25 to 41 Btu) per square foot to effectively warm floors.  The National Electric Code limits the maximum heat that should be installed in the floor to 15 watts per square foot.
  2. Only the floor areas where the occupants will stand or walk require warming in order for a radiant floor warming system to effective.  Radiant space heating however may require different coverage to satisfy the requirements of a Heat Load or Loss Calculation.
  3. Proper spacing of the heating element or tubing is very important because the human foot is very temperature sensitive and even a few degrees temperature differential will be noticed.
  4. The spacing of the heating element or tubing will vary depending upon the R-value of the insulation below the sub-straight, the sub-straight material, what ever will cover the heating element or tubing, and the floor covering.
  5. Keep the heating element or tubing away from the base of the toilet and/or bidet because the wax ring that makes the drain water tight may be compromised by the heat.
  6. Determine if it is desirable to heat the shower floor or the shaving bench.
  7. Avoid one size fits all products that require the project to adjust to the radiant floor warming product rather than the other way around.

Once the design is complete the best products for that design can be determined and a final selection made.

Product Selection

Often times, product selection occurs simultaneously with the design process.  The nature of the design process helps focus on the advantages and disadvantages of different technologies and thus helps determine which are best suited for the project.  At the very minimum the design process should help eliminate most of the competing radiant floor heating technologies from further consideration leaving less than a hand full for further evaluation.

Remember number 7) under design and do not allow the product to control the project.  Since many competing products are available and they differ in technology, quality and warranty coverage, most buyers are well served by contacting a radiant floor warming professional to assist in determining which is best suited for their needs and their project.


More difficult than design and product selection (but equally deserving of attention to detail), is the proper installation of the radiant floor warming system.  As a matter of fact incorrect installation and/or product damage during installation are the two leading causes of problems in the radiant floor warming industry.

No doubt the best way to insure proper installation is to choose a product made by a manufacturer that has a comprehensive installation manual, offers unlimited technical support and has been in business for more than a couple of years.

Steven Bench is Managing Member of Heatizon Systems a leading manufacturer of radiant snow melting, floor warming, roof snow and ice melting, pipe warming, and radiant space heating products located in Murray, Utah.      

Remodel with Heated Floors

Are you looking to upgrade rooms, make additions, or delve into new construction?  Then heat it up with a Heatizon System product.  Our electric radiant heat products and line voltage heating systems are ideal for renovations, remodeling, and new construction.

Many wonder what separates Heatizon Systems from the rest.  Heatizon Systems will drastically improve the heating in a home, office, or building. Heatizon heated floor and snow melting products are ideal for anyone who wants to improve his or her safety, is striving for comfort, and is in the market for versatile products.  In addition, Heatizon heating elements are thin, flexible and extremely accommodating.

Heatizon Systems technologically advanced products are great for heated floors in room additions, sunrooms, basements, kitchens, and bathrooms.  We manufacture safe, consistent, and high quality products.  These flexibile and diverse product options help to fulfill anyone’s heating needs.  For instance, Heatizon products can be retrofit into existing concrete or asphalt or into joist spaces in an unfinished area.

Do you need permanent heating solutions to help with winter weather troubles?  A Heatizon Melting System is perfect for driveways, walkways, stairs, and ramps.  The System will automatically turn on once the snow begins falling and then turn off when the surface is dry leading to consistent and stunning results.

Heatizon’s Radiant Roof Snow Melt and Deicing System is patented and designed to be installed under any roof covering material including metal, composite and asphalt, fiberglass, membrane, shake and others.  The owner is able to avoid messy looking roofs and instead is left with a rich and ravish looking roof that eliminates icicles, ice dams, and snow build up.

Our main goal is to make sure that every purchaser of any Heatizon Product is satisfied and pleased with our services and products.  Feel free to give us a call to receive a fee consultation with a Heatizon dealer or visit our website at  Let our experienced professionals help you with your heating needs.

Copyright 2022 - Heatizon Systems | Sitemap | Privacy Policy